Replace the 55 gallon barrel with a 5 gallon bucket and a siphon. It makes life in the rental party equipment world easier. It’s important to have enough water pressure when using this device.
In line mixing device- replaces water pump | This device does not require electricity. When using one foam machine (typically at a kids party) it’s now possible to show up, turn your vehicle off, and have foam running seven minutes later. You do not need to carry a 55 gallon (190 liter) barrel or wait for the barrel to fill up and mix it. You simply fill a 5 gallon (20 liter) pail and then start the foam fan.
It’s important to have enough water pressure when using the mixing device. The siphon piece works well when 35 psi water pressure minimum pushes through the hose set-up. Know that you may end up using a water pump. You may always buy a water pump at your local hardware store. Remember to get the proper fittings so the hose connects snugly to that water pump and then goes on up into the foam machine. It’s important to know your water pressure for the in-line device. It’s important to test equipment before using it. The big day comes around and you haven’t tested. That’s an amateur mistake. We work with amateurs less and less and that’s a good thing. Click buttons and enter information.
Quick Connect Ends
These pieces are easy to replace and allow for simple hook up and unhooking of your hose to the machine and water source. This purchase comes with 2 quick connects.
The atomizer creates 4 streams of solution out of one piece. More solution to the machine means more foam production. This purchase comes with the atomizer, a reducer to fit the 1/2" PVC in the machine and a cap to cap off one of the ports for the sprayer tips. Eliminate one sprayer tip and replace the other with the atomizer.