102 Single Serving Bags + ALL IN ONE  BACKYARD FOAM PIT MACHINE (Air Blower not included)

• 1 Foam Powder pack lasts between 30 and 60 minutes ; ready-to-use product
• Individually packaged - tear open, dump, stir....simple
• One pack mixes with 60 to 120 gallons of water
• No odor when used properly
• 100% satisfaction guaranteed, Engineered & packaged in the USA
• Board-certified dermatologist approved

Free all 

ALL IN ONE  BACKYARD FOAM PIT MACHINE (13 Ft x 13 Ft square foam pit, 3 ft tall), water pump, and hose. It does not include a blower or fan.

Add your inflatable blower to the pit and that's all you need.  With this unit, there is no need for a stand, water pump or foam fan.  This pit has everything you need, sets up in less than 2 minutes, and creates foam in less than five minutes. The foam pit fits in practically any backyard.  It requires only one electrical plug and one water source as well as your own one HP blower. With this simple unit, no attendant is needed  if you use your own water pump, then you typically get more foam quicker. This unit requires your own 1 hp blower. Your blower creates the air to push the foam through the mesh sock to create foam. 

There's no need for a separate foam unit. The pit creates the foam. This means that the air needed to create foam comes from your blower. With this revolutionary foam generator, there is no stand or foam fan. Those items are not necessary. This is great for backyard drop off parties. 

All in 1 Pit set up instructions

1. Spread the foam pit out and attach your blower to the back of the foam pit.  Turn the blower on and the pit should inflate quickly. (A 1.25 hp blower is recommended) 
2. Undo the Velcro straps and strap the hose in.  Make sure the hose is centered.  Keep velcroing all the way to the end.  
3. Next; attach your hose to the pump or siphon, depending on your setup.  
4. Screw the brass metal piece provided into the hose.  Next; screw the pointy spiral atomizer into the brass piece. Velcro the hose into place.
5. Attach the sock over the hose and atomizer with the attached velcro.
6. Place your pump or siphon into your bucket of solution mixture.

• When using a siphon:
• Use a 1.25 hp blower.
• Increase foam ratio: 5 gallons of water to 1.25 bags of powder plus 1/2 cup glycerin (optional)
• Use a stiff plastic hose! A larger inside diameter hose works better.
• Atomizer needs to be clipped or clamped so the foam mixture drains down the middle of the sock.  Use a baby bungee cord.
• When using a water pump:
• Use at least a 1 hp blower. A larger inside diameter hose works better.
• Mix 1 powder pack into 50 gallons of water plus 1/2 cup glycerin (optional)
• Atomizer needs to be clipped or clamped so the foam mixture drains down the middle of the sock. A baby bungee cord works well.

Watch a set up video at  https://youtu.be/pyrHrAh-GZE